Australia temporary fence manufacturer
TOPSFENCE supplies Australia temporary fence for sale as a complete Australian style temporary fencing system: welded panels, plastic feet, clamps, braces, gates, finishes and export packing checked together before shipment.
Product overview
An Australia temporary fence order should be quoted as a complete bay, not only as a loose welded panel. The practical question is whether the frame tube, foot opening, clamp spacing, brace connection and gate hardware work together on site.
Most requested
Standard stock
Rounded-top welded panels for buyers who need a familiar temporary fence Australia profile for resale, site security and construction projects.
Site security
For exposed runs, corners, access points and construction boundaries where support stays improve stability.
Access control
Matching pedestrian and vehicle access can be quoted with the same tube, infill, coating and hardware plan.
For US importers
US buyers usually compare several regional temporary fence systems. The Australian temporary fence style is easy to recognize from its rounded frame, plastic feet and clamp connection, but compatibility details still need to be confirmed before ordering.
The continuous top corners create the common Australian style temporary fencing appearance and reduce separate corner joints.
The tube outside diameter must match the plastic foot opening. Small differences can slow installation.
Clamp size, bolt length and panel gap should match the frame tube and the way the fence line is assembled.
Brace quantity should follow corners, gates, exposed runs and project wind assumptions instead of a fixed guess.
Pallet labels, accessory cartons and repeated pack counts help distributors receive and resell the order.
Spec sheets can list metric dimensions with inch references to make US warehouse checks easier.
Technical reference
These are common starting points for Australia temporary fence quotations. Final dimensions can follow your drawing, old order sheet, sample photos or target market stock size.
| Specification | Common options | Quotation note |
|---|---|---|
| Panel height | 2100 mm 1800 mm, 2000 mm, custom height |
Height affects panel weight, tube strength, packing and support requirements. |
| Panel width | 2400 mm, 2500 mm 2900 mm or custom width |
Width changes foot spacing, pallet length, container loading and installed bay count. |
| Frame tube | 32 mm, 38 mm round tube common wall thickness 1.2-2.0 mm |
Tube size must match your foot and clamp system if you already hold stock. |
| Wire diameter | 3.0 mm, 3.5 mm, 4.0 mm before or after coating by agreement |
Heavier wire improves rigidity but increases panel cost and shipping weight. |
| Mesh opening | 60 x 150 mm, 75 x 150 mm 100 x 200 mm, 100 x 300 mm |
Opening should follow the local market expectation and required visibility. |
| Welded mesh | Low carbon steel wire pre-galvanized or welded before hot-dip galvanizing |
Clarify whether galvanizing is before or after welding when comparing quotes. |
| Feet and clamps | Plastic feet, filled feet, two-piece clamps, bolts and nuts | Accessory quantities should be shown as separate line items for receiving checks. |
| Gates and braces | Pedestrian gates, vehicle openings, support braces, brace feet | Gate and brace parts need their own packing labels to avoid missing hardware. |
Complete bay supply
An Australian temporary fence bay works only when the small parts fit the panel. We can separate panels, bases, clamps, braces, gates and spare hardware in the quotation so the full order is visible before production.
Rounded-frame welded panels with size, tube, wire and mesh confirmed from your order standard.
Blow-molded or filled feet selected around tube diameter, site use and packing method.
Two-piece clamps, bolts and nuts matched to the frame tube and required panel gap.
Braces and brace feet for corners, gates, exposed runs and temporary fence lines needing extra support.
Pedestrian and wider access options coordinated with panel height, frame tube and hardware.
Extra clamps, bolts, nuts and labels packed in counted cartons for warehouse control.
Surface protection
Finish choice affects service life, appearance and price. Tell us whether you need a bright galvanized surface, stronger post-weld protection, or a colored coating for a specific project or resale market.
A common cost-controlled option when the order follows standard stock expectations and a clean galvanized appearance.
Used when buyers want stronger coverage around welds, cut edges and outdoor handling points.
Black, green, orange, blue and custom project colors can be discussed when appearance or branding matters.
Factory control
For an Australia temporary fence order, the factory check must cover dimensions and compatibility, not only the finished surface. The small parts decide whether the panels install smoothly after arrival.
Confirm tube outside diameter, wall thickness, wire diameter and mesh opening against the order.
Measure height, width, diagonal and rounded-frame shape before bundling.
Check mesh-to-frame welds, remove sharp wire ends and review panel flatness.
Sample the actual production tube with specified feet, clamps, braces and gate connections.
Review galvanized surface, coating coverage, scratches and contact points before final packing.
Match panel pallets and accessory cartons to the packing list, with photos when required.
Typical applications
Australian temporary fencing is used where removable perimeter control, visibility and fast setup matter. The accessory plan should change with the site, even when the panel size stays the same.
Site boundary control for building projects, road work, equipment zones and restricted access areas.
Temporary separation for entrances, service lanes, queues and public crowd guidance.
Temporary separation around factories, maintenance areas, loading zones and short-term industrial work sites.
Short-term boundaries for vacant lots, material storage areas, maintenance zones and restricted temporary spaces.
Export packing
Large panels are easy to count. Clamps, bolts, brace pins and gate hardware are easier to lose. Packing should make the order easy to receive, store and re-ship.
Panel pallets stacked by size with contact protection and stable strapping.
Feet and braces grouped by part type, quantity and order reference.
Clamp cartons counted, labelled and separated from gate hardware.
Loading photos available when buyers need a shipment record before departure.
Get a useful quote
The lowest panel price can become expensive if tube, wire, feet, clamps, braces or packing are different. Use the same specification when comparing Australia temporary fence for sale from different suppliers.
Height, width, tube wall, wire diameter and mesh opening control steel weight and unit price.
Pre-galvanized, hot-dip galvanized after welding and powder coated finishes price differently.
Foot material, weight, color, clamp thickness, bolt type and spare hardware change the package cost.
Support stays, gate frames, hinges, latches and special openings should be counted separately.
Production setup, pallet use, accessory carton count and container loading improve with repeatable quantities.
Steel pallets, labels, loading method and destination port affect the final landed comparison.
Before requesting a quote
Short answers for importers, distributors, contractors and rental fleets comparing Australian temporary fence specifications.
It is a temporary fence system commonly recognized by a rounded steel tube frame, welded mesh infill, plastic feet and clamp connections. TOPSFENCE supplies the panel and accessories as a factory-direct export order.
Yes. Panels, plastic feet, clamps, braces, gates and spare hardware can be quoted as separate line items so the receiving quantity is clear.
Send the current panel size, tube diameter, mesh opening, foot opening, clamp photo and any old order sheet. We will compare the connection points before quoting.
Pre-galvanized material is common for standard stock. Hot-dip galvanizing after welding can be used when stronger weld-area protection is required. Powder coated colors are available for project needs.
Send panel height and width, tube size, wire diameter, mesh opening, surface treatment, foot type, clamp quantity, brace and gate quantity, total order volume and destination port.
Yes. Pedestrian and wider access gates can be supplied with matching frame tube, welded mesh, finish, hinges, latch and related hardware.
Request a quote
Share the panel size, tube, wire, mesh, finish, feet, clamps, braces, gates, quantity and destination. We will reply with a practical factory quotation.
